News Center-Oasis Bingfeng

NEWS CENTER

Oasis Iceberg

11 Jul,2024

How much can a cooling tower typically reduce the temperature by?

Normally, the temperature of a cooling tower cannot drop indefinitely—on paper, the lowest it can go is wet-bulb temperature plus 3 degrees.

11 Jul,2024

What should you do if the product malfunctions during use?

1. For induced-draft units, inspect and confirm that the designed external static pressure matches the actual external static pressure. 2. Check that the water level in the drip pan meets the recommended requirements. Note: Air density directly affects the ammeter reading. Lower air density causes the fan to rotate faster, resulting in a higher current value.

11 Jul,2024

Installation of Cooling Tower

1. Avoid installing in waterproof passages or near high walls that easily reflect sound volume; installation should be on the roof or in well-ventilated areas. 2. When using two or more cooling towers simultaneously, pay attention to the spacing between the towers. 3. Do not install in places surrounded on all four sides by exterior walls or areas with no air permeability; also pay attention to the spacing between the tower and the exterior walls.

11 Jul,2024

A Brief Analysis of the Cooling Capacity of Closed Cooling Towers

A closed-circuit cooling tower uses circulating working fluid to carry away the excess heat generated by the machine's operation, creating heat exchange inside the tower and dissipating the heat into the atmosphere. The cooling capacity of a closed-circuit cooling tower refers to how much heat the cooling equipment can reduce from the cooled liquid in one hour. The scientific unit for measuring cooling capacity is Kcal/h, which means kilocalories per hour. Cooling capacity is one of the main parameters of cooling equipment and is very important for the performance of a closed-circuit cooling tower.

11 Jul,2024

What should I do if the product encounters a malfunction during use?

What to do in case of incomplete spray mode? The nozzle or filter screen may be clogged. Remove the nozzle for cleaning and flush the water distribution system. What to do about fan noise? It may be caused by the fan blades scraping against the inner wall of the exhaust duct. Adjust the exhaust duct to ensure there is a certain gap between the blade tips and the duct wall.

11 Jul,2024

How to choose the material for the cooling tower body?

Currently, the outer panels of closed cooling towers generally use galvanized steel panels, aluminum-zinc coated panels, magnesium-aluminum-zinc coated panels, and stainless steel panels. As a new type of panel, magnesium-aluminum-zinc coated panels are increasingly favored by closed cooling tower manufacturers due to their high corrosion resistance, self-healing properties, and low cost. Based on the experience of the corrosion resistance of galvanized and aluminum-zinc coated panels and the high cost of stainless steel panels, magnesium-aluminum-zinc coated panels were first introduced in the closed cooling tower industry. Today, let's share about this amazing panel.

< 1...32 33 34...40 > proceed page

Oasis Bingfeng Fluid Equipment Co.,Ltd

Contact Phone:+86 4000 616 676
Fax:+86 0310 3178005
E-mail:sales@hdbingfeng.com
Contact Address:No.1, Happiness Road, Feixiang Economic Development Zone, Handan City, Hebei Province

Business License