News Center-Oasis Bingfeng

NEWS CENTER

Oasis Iceberg

11 Jul,2024

What are the reasons that affect the cooling effect of the closed cooling tower?

The closed cooling tower reduces the waste of water resources and achieves the effect of energy saving and emission reduction. At the same time, the device also has many problems. For example, the cooling effect of closed cooling tower is not ideal, which is the problem we need to pay attention!

11 Jul,2024

Precautions for Preventing Freeze Damage in Cross-Flow Closed Cooling Towers

Oasis Ice Peak: As winter approaches, we need to pay attention to freeze protection for our crossflow closed cooling towers! Our crossflow cooling towers are designed and selected based on the higher wet-bulb temperatures typical of summer conditions. However, during seasons when wet-bulb temperatures aren’t as high—especially in the cold winter months—their cooling capacity actually becomes excessive.

11 Jul,2024

How can a closed cooling tower be protected from freezing?

1. Operating a closed-circuit cooling tower below 0°C may lead to freezing of the fill material and air inlet windows, depending on your设定 for the chilled water outlet temperature. It is generally recommended to maintain an outlet water temperature of no lower than 10°C during winter. However, if lower temperatures are beneficial for operation, ensure that the system is run within this reduced range.

11 Jul,2024

How to winterize a closed cooling tower?

As winter approaches, closed-circuit cooling towers, like our other equipment, must take the necessary measures to successfully get through the winter, ensure that there are no problems, play a normal role, and escort production.

11 Jul,2024

What kind of water is used for closed cooling tower circulation?

Closed cooling towers, due to their fully enclosed circulation, have no evaporation, no consumption, no scaling, and no freezing. Generally, they use pure water circulation to prevent scaling. In winter, antifreeze can be used to avoid freezing hazards caused by short-term shutdowns. Antifreeze: Please prepare an appropriate amount of antifreeze according to the local minimum temperature. Pay attention to adding corrosion inhibitors and defoamers to prevent corrosion of carbon steel parts in the system and reduce foam generation during circulation.

11 Jul,2024

Preparation before operation of cross-flow cooling tower!

1. Remove foreign objects from the air inlet. 2. Ensure there is sufficient clearance between the tail of the fan and the air duct to prevent damage during operation. 3. After completing the above checks, intermittently start the switch to check whether the fan is operating correctly and whether there are abnormal noises or vibrations. 4. Clean the debris from the hot water pan and the inside of the tower.

< 1...28 29 30...40 > proceed page

Oasis Bingfeng Fluid Equipment Co.,Ltd

Contact Phone:+86 4000 616 676
Fax:+86 0310 3178005
E-mail:sales@hdbingfeng.com
Contact Address:No.1, Happiness Road, Feixiang Economic Development Zone, Handan City, Hebei Province

Business License