NEWS CENTER

Oasis Iceberg

12

2024

-

07

Working process of closed cooling tower


In the industrial production process, a large amount of waste heat will be generated. If the waste heat is not dissipated in time, the production equipment will be damaged and the production schedule will be affected. Therefore, the cooling of industrial equipment is very important. Closed cooling towers play a huge role in the cooling of industrial equipment.

In the industrial production process, a large amount of waste heat will be generated. If the waste heat is not dissipated in time, the production equipment will be damaged and the production schedule will be affected. Therefore, the cooling of industrial equipment is very important. Closed cooling towers play a huge role in the cooling of industrial equipment.

1651453143823855.jpg

closed cooling tower working process:

1. The closed cooling tower spray pump pumps water from the water tank to the upper part of the heat exchange coil, and sprays in an umbrella shape through the nozzle to continuously and evenly cover the outer surface of the pipe to form a thin water film. Part of the water absorbs the heat energy of the high-temperature refrigerant in the pipe, converts it into latent heat of vaporization and evaporates into gaseous state. The refrigerant inside the pipe cools down or condenses into liquid state;IMG_257

1651453872578121.png

2, the wind system, the tower top fan is suction type, from the tower exhaust outward discharge, the tower outside the cold dry air from the inlet grid through the filter debris into the tower, from the bottom of the heat exchange coil upward flow, will have evaporated water vapor away, air humidity and temperature increase, by the fan out of the tower;

1655521442886347.jpg

3. In the spray tank, a floating ball valve is set. When the water level is low, it will automatically supplement the supply to ensure a certain water level of the tank.

1655515170290109.jpg

oasis environmental protection equipment limited company, specializing in closed cooling tower.