News_Oasis Bingfeng

NEWS CENTER

Oasis Iceberg

17 Jun,2024

The intelligence of petroleum smelting process involves the use of information technology, automation technology, artificial intelligence technology, etc.

Delayed coking: The process of using high temperature and high pressure to extend the residence time of heavy oil to make it a large amount of cracking into gas, liquid and coke.

17 Jun,2024

The process method for refining crude oil into products such as fuel oil and lubricating oils.

Catalytic Reforming Process: Using gasoline fractions as the feedstock, this process involves conducting a structural reforming reaction—under the presence of a catalyst and hydrogen gas—at specific pressure (25–30 kg/cm²) and temperature (490–530°C). During this reaction, non-aromatic hydrocarbons are converted into aromatics. After further refining, the process yields high-octane gasoline as well as valuable byproducts such as benzene, toluene, and xylene.

17 Jun,2024

Hydrotreating: A process that uses a catalyst to react heavy oils or certain fractions with hydrogen gas under high temperature and pressure.

Hydrotreating: A process that uses a catalyst to react heavy oils or certain fractions with hydrogen under high temperature and pressure, removing impurities such as sulfur, nitrogen, and oxygen, thereby improving the properties of the final product.

$Hydrotreating: A process that uses a catalyst to react heavy oils or certain fractions with hydrogen gas under high temperature and pressure.$

17 Jun,2024

Catalytic cracking method: Process the atmospheric and vacuum distillates at 460–530°C and a pressure of 1–2 kg/cm².

Delayed coking: A process that involves extending the residence time of heavy oil under high temperature and pressure, causing it to undergo extensive cracking into gases, liquids, and coke.

29 Mar,2024

Specializing in the research and development, manufacturing, and sales of cooling equipment, we are located at No. 1 Xingfu Road, Feixiang Development Zone, Handan City.

Handan Oasis Environmental Equipment Co., Ltd. was established in 2003 with a registered capital of 20 million yuan. The company specializes in the research and development, manufacturing, and sales of cooling equipment. It is located at No. 1 Xingfu Road, Feixiang Development Zone, Handan City, covering an area of 26,666 square meters.

01 Jun,2024

What should I do about the loud noise from the closed cooling tower???

During operation, closed cooling towers generate significant noise due to the continuous functioning of the water pump, fan, and circulating water. This noise is primarily caused by vibrations, and it typically manifests in several key areas: the sound of water droplets falling, the aerodynamic noise from the fan, and the vibration noises originating from the pump. Moreover, the resonance effect of these noises can spread over a relatively wide area. To address this issue, common solutions include blocking noise transmission, installing sound-absorbing insulation materials, and replacing the fan with one that operates at a lower rotational speed. Today, let’s dive deeper into practical methods for reducing noise levels in closed cooling towers.

< 1...36 37 38...40 > proceed page

Oasis Bingfeng Fluid Equipment Co.,Ltd

Contact Phone:+86 4000 616 676
Fax:+86 0310 3178005
E-mail:sales@hdbingfeng.com
Contact Address:No.1, Happiness Road, Feixiang Economic Development Zone, Handan City, Hebei Province

Business License