NEWS CENTER
Oasis Iceberg
01
2024
-
06
Introducing the working process of a circular open cooling tower
The hot water autonomous machine room uses a water pump to pressurize the circulating water through pipes, horizontal throats, curved throats, and central throats into the cooling tower's water distribution system. The water is evenly sprayed onto the packing material through small holes in the distribution pipes.
The hot water autonomous machine room uses a water pump to pressurize the circulating water through pipes, horizontal throats, curved throats, and central throats into the cooling tower's water distribution system. The water is evenly sprayed onto the packing through small holes on the distribution pipes.
Dry air with low wet-bulb temperature enters the tower through the bottom air inlet grid under the action of the fan. When the hot water flows over the surface of the packing, it forms a water film and exchanges heat with the air. The high humidity and high wet-bulb temperature hot air is drawn out from the top, while the cooled water drips into the bottom basin and flows back to the main machine through the outlet pipe.
Generally, the air entering the tower is dry air with a low wet-bulb temperature. There is a significant difference in the concentration of water molecules and kinetic pressure between the water and the air. When the fan operates, under the effect of static pressure inside the tower, water molecules continuously evaporate into the air, becoming water vapor molecules. The average kinetic energy of the remaining water molecules gradually decreases, causing the temperature of the circulating water to slowly drop.
Previous Page
Previous Page
Oasis Bingfeng Fluid Equipment Co.,Ltd
Contact Phone:+86 4000 616 676
Fax:+86 0310 3178005
E-mail:sales@hdbingfeng.com
Contact Address:No.1, Happiness Road, Feixiang Economic Development Zone, Handan City, Hebei Province
Copyright©2024 Oasis Bingfeng fluid equipment co., ltd